Guide for the use and operation of rotary copper tube cutting machines

Operating Steps

• Installation: First, open the packaging, check if the machine is complete, and then install the cutting blade. Use the cutting blade according to the machine recommendations.

• Adjusting the cutting angle: Place the copper tube into the machine and adjust the cutting angle to ensure that the copper tube is level with the machine.

• Start the machine and rotate the copper pipe cutting machine to start working.

Precautions for use

• Before use, check whether all components of the machine are in good condition and confirm that the machine is in good working condition.

• When cutting, do not touch the surface of the copper tube with your hands to prevent scratches.

• When using cutting blades, follow the recommended speed of the cutting blades and do not exceed the speed limit.

• When the machine is running, it is strictly prohibited to put your hands inside the copper pipe to prevent cutting pieces from injuring people.

• After use, clean the copper shavings on the machine and workbench to maintain a clean working environment.

Maintenance and upkeep

• Regularly check the wear of the cutting blades and replace them with new ones in a timely manner.

• Keep the machine clean and regularly clean the copper shavings inside the machine.

• Regularly add lubricating oil to moving parts such as machine bearings to keep the machine smooth.