BJ44001B
Size: | |
---|---|
Corlor: | Please select |
Availability: | |
Quantity: | |
A water pressure reducing valve, also known as a pressure regulator or PRV, is used for controlling the water pressure entering a house from the main pipeline. Its purpose is to lower the pressure if it exceeds 80PSI in the main water line. By doing so, this valve ensures that the water pressure is reduced to a safe level before it reaches any plumbing devices within the house. It is crucial to maintain the water pressure at a safe level in order to prevent plumbing issues such as leaks and pipe bursts.
When a water pressure reducing valve is installed, it reduces the strain on the internal plumbing appliances. This means that faucets, shutoff valves, and water heaters are less likely to leak, and any fluctuations in water pressure are effectively balanced.
Model Number | BJ44001B |
Material | Brass |
Size | 1/2'' 3/4'' 1'' |
Working Temperature | 0~85°C |
Working Medium | Hot/Cold Water |
Max Inlet Water Pressure | 12 bar |
Outlet Water Pressure | 3 bar |
Adjusted Pressure Range | 0.5~6bar |
Tested according to CE standards |
A water pressure reducing valve is normally installed near the main water shutoff switch. You can start or stop it by using the adjustment screw.
The water pressure reducing valve works under a spring-loaded diaphragm, which will narrow or widen the water flow according to the amount of water pressure entering the valve. When the water enters the valve at high pressure, the inner device constricts the diaphragm to narrow the flow of water. Under this situation, the pressure will be reduced into a range of 50 to 80 psi. It greatly reduces the stress of your plumbing system. Conversely, when the water pressure drops, the diagram opens wider to allow more water to flow through the valve.
You can adjust the screw on the top of regulator to limit the water flow to adjust the pressure
A water pressure reducing valve is used to connect with your plumbing system and is installed where the main water line enters your home. The functions is reducing the water pressure once pipes pressure exceeds 80 PSI, which is the generally approved rate for residential or light commercial use
If you want to DIY, it’s best to install it after the shutoff valve. Before beginning, shut off the water supply lines.
You’ll notice that most pressure regulator valves have an arrow pointing in the direction of the water flow. We should connect the pipes with the valve in the right position. If the position is wrong, the valve will not work properly. Be sure to test the water pressure and make adjustments accordingly.
This valve adopts membrane structure, simple internal structure, strong environmental use and durable
No bypass pipe is required, and the distribution pipe is simple, to save space and distribution cost.
It can be installed in front of most tap water equipment.
There is pressure adjustment knob in the top cover, which can be adjusted free.
This product can be withstand pressure of 1.2Mpa.
Competitive Price: We are the factory direct sale to abroad markets, that means you can get the price from the original manufactures, no any traders or middle companies.
Expertise and experience: We have a team of experts with extensive knowledge and experience in the industry for more than 25 years. We understand the complexities and nuances of our products/process/equipment, allowing us to provide high-quality solutions.
Quality Products: We prioritize delivering products that meet the highest quality standards. Every product to be delivered to our customers must be checked and approved by test before shipment. We 100% commit the quality we deliver will make you satified and exceed your expectations.
Timely Delivery: We understand the importance of delivering our products on time. Our efficient processes and logistics ensure prompt delivery, minimizing any unnecessary delays.
Innovation and Technology: We focus on innovation and devote to the latest technologies to develop cutting-edge products and solutions, to ensure that you benefit from the latest features and functionalities.
Q1. Are you a factory or trading company?
A: We are a factory and trade company together. We have our own factory with different workshops and production equipment lines. Welcome to visit our factory!
Q2. Can I have a sample order ?
A: Yes, sample order can be offered to test and check quality.
Q3. Do you have any MOQ limit for one order?
A: For promotion items: No MOQ, 1pc available & For non-promotion items: 1000~3000pcs MOQ according to different models
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea. It takes approx 30 days to arrive. Airline shipping can be also optional.
Q5. What’s your production lead time?
A: Sample order: 7~10 days;Bulk order: 30~45 days
Q6. Can you do OEM?
A: Yes, welcome to provide drawings or samples for customization.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 3 years warranty to our products.
A water pressure reducing valve, also known as a pressure regulator or PRV, is used for controlling the water pressure entering a house from the main pipeline. Its purpose is to lower the pressure if it exceeds 80PSI in the main water line. By doing so, this valve ensures that the water pressure is reduced to a safe level before it reaches any plumbing devices within the house. It is crucial to maintain the water pressure at a safe level in order to prevent plumbing issues such as leaks and pipe bursts.
When a water pressure reducing valve is installed, it reduces the strain on the internal plumbing appliances. This means that faucets, shutoff valves, and water heaters are less likely to leak, and any fluctuations in water pressure are effectively balanced.
Model Number | BJ44001B |
Material | Brass |
Size | 1/2'' 3/4'' 1'' |
Working Temperature | 0~85°C |
Working Medium | Hot/Cold Water |
Max Inlet Water Pressure | 12 bar |
Outlet Water Pressure | 3 bar |
Adjusted Pressure Range | 0.5~6bar |
Tested according to CE standards |
A water pressure reducing valve is normally installed near the main water shutoff switch. You can start or stop it by using the adjustment screw.
The water pressure reducing valve works under a spring-loaded diaphragm, which will narrow or widen the water flow according to the amount of water pressure entering the valve. When the water enters the valve at high pressure, the inner device constricts the diaphragm to narrow the flow of water. Under this situation, the pressure will be reduced into a range of 50 to 80 psi. It greatly reduces the stress of your plumbing system. Conversely, when the water pressure drops, the diagram opens wider to allow more water to flow through the valve.
You can adjust the screw on the top of regulator to limit the water flow to adjust the pressure
A water pressure reducing valve is used to connect with your plumbing system and is installed where the main water line enters your home. The functions is reducing the water pressure once pipes pressure exceeds 80 PSI, which is the generally approved rate for residential or light commercial use
If you want to DIY, it’s best to install it after the shutoff valve. Before beginning, shut off the water supply lines.
You’ll notice that most pressure regulator valves have an arrow pointing in the direction of the water flow. We should connect the pipes with the valve in the right position. If the position is wrong, the valve will not work properly. Be sure to test the water pressure and make adjustments accordingly.
This valve adopts membrane structure, simple internal structure, strong environmental use and durable
No bypass pipe is required, and the distribution pipe is simple, to save space and distribution cost.
It can be installed in front of most tap water equipment.
There is pressure adjustment knob in the top cover, which can be adjusted free.
This product can be withstand pressure of 1.2Mpa.
Competitive Price: We are the factory direct sale to abroad markets, that means you can get the price from the original manufactures, no any traders or middle companies.
Expertise and experience: We have a team of experts with extensive knowledge and experience in the industry for more than 25 years. We understand the complexities and nuances of our products/process/equipment, allowing us to provide high-quality solutions.
Quality Products: We prioritize delivering products that meet the highest quality standards. Every product to be delivered to our customers must be checked and approved by test before shipment. We 100% commit the quality we deliver will make you satified and exceed your expectations.
Timely Delivery: We understand the importance of delivering our products on time. Our efficient processes and logistics ensure prompt delivery, minimizing any unnecessary delays.
Innovation and Technology: We focus on innovation and devote to the latest technologies to develop cutting-edge products and solutions, to ensure that you benefit from the latest features and functionalities.
Q1. Are you a factory or trading company?
A: We are a factory and trade company together. We have our own factory with different workshops and production equipment lines. Welcome to visit our factory!
Q2. Can I have a sample order ?
A: Yes, sample order can be offered to test and check quality.
Q3. Do you have any MOQ limit for one order?
A: For promotion items: No MOQ, 1pc available & For non-promotion items: 1000~3000pcs MOQ according to different models
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea. It takes approx 30 days to arrive. Airline shipping can be also optional.
Q5. What’s your production lead time?
A: Sample order: 7~10 days;Bulk order: 30~45 days
Q6. Can you do OEM?
A: Yes, welcome to provide drawings or samples for customization.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 3 years warranty to our products.